FLIR Raymarine i70, User Reference

Page: 36 / 82

6.1 Setting the race timer
If the race timer has not been setup as a favorite page then the
timer can be accessed from the view data menu:
Menu > View
data > Time > Race timer .
Ra c e tim e r
S TART
D 12076-1
1. To add the race timer as a favourite page from the View data
menu display the race timer and press the RIGHT SOFT button.
2. Select Quick Options and then select Add to favourites .
3. Once the race timer is a favoruite page to use press the RIGHT
SOFT button and then select Quick options .
The following options will be available:
• Start timer
• Stop timer
• Reset timer
• Adjust start times
4.
6.2 Using the race timer
Once the Race timer has been set you can use the timer by
following the steps below:
1. When on the Race timer screen Press the RIGHT SOFT button
and select Quick options form the menu
2. To adjust a timer setting select Adjust start timer .
i. Use the UP and DOWN buttons to select either timer 1,2, or 3.
ii. Use the UP and DOWN buttons to change the timer value to
the required setting and press SELECT to confirm.
3. To start the timer select Start timer from the Quick options
menu.
4. To pause the current running timer select Stop Timer .
5. To resume the timers count down select RESUME from the
Quick options menu.
6. To reset the current timer select Reset Timer .
7. Once the timer reaches zero count up shall begin automatically.
8. To skip to the next timer press the SKIP key.
9. Whilst the timer is running you can view other favorite pages
as normal.
Audible beeps shall be sounded at defined intervals to alert you
to the timer status as follows:
• Double beep every minute.
• Beep Three times at the start of the last 30 seconds.
• Beep every second for the last 10 seconds.
• Beep for two seconds when the timer reaches zero
36
i70 Instrument display User reference