FLIR Raymarine CAM220IP, Installation Instructions Manual

Page: 15 / 54

3.3 Parts supplied
CAM220IP
The following items are supplied with your product.
Item Description Quantity
IP camera (Includes a 1
m (39.4 in) ethernet and
power pigtail cable)
1
Documentation and
software pack 1
Mounting screws 4
Nylon washers 4
Hex wrench (Allen key) 1
Waterproof RJ45 coupler 1
Note: To connect the camera to a compatible
MFD, a RayNet to SeaTalk hs (male) adaptor cable
is also required. For details on available network
hardware and cables refer to
Chapter 11 Spares
and accessories
3.4 Tools required
Product installation requires the following tools:
Item Description
Power drill
Drill bit of appropriate size*
Pozi drive screwdriver
Note: * The appropriate drill bit size is dependent
on the thickness and material of the mounting
surface.
Planning the installation
15