FLIR Raymarine AIS5000, Installation & Operation Instructions, Page: 71 / 110

STEDS mode
Page 69
5.2 STEDS Presentation interface
5.2.1 Operating mode configuration and reporting
The STEDS operating mode may be set by any of the following means:
● "PUCG,STEDS propriatary sentence on the NMEA 0183 PI
● "PGN# 65535 on the NMEA 2000 PI
The following means are supported also for compatibility with legacy
systems:
● "PL3A,STEDS proprietary sentence on the NMEA 0183 PI
● "PGN# 65534 on the NMEA 2000 PI
The current STEDS operating mode is reported via the PI periodically
using the sentence and PGN report. If an explicit query is presented
using the legacy sentence or PGN, then the query response shall use
the legacy form.
5.2.2 EAIS message transmission
In
Normal Transmit
and
Restricted Transmit
modes transmission of EAIS
messages requires the appropriate ASM requests to be presented to the AIS
as defined in Table 8. ASM requests may be presented in the following
manner:
● "ABM or BBM sentence on the NMEA 0183 PI
● "PGN# 126208 Command Group Function
In addition, when the EAIS legacy mode is enabled, binary message PGN#'s
129796, 129797, 129811, and 129812 on the NMEA 2000 PI shall be
interpreted as a transmission request equivalent to an ABM / BBM request.
5.2.3 EAIS message receive
All received broadcast or own-vessel addressed binary messages are
output on the PI without interpretation by the AIS transceiver.