FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 86 / 146

September 6, 2017 80
Configuration and Operation
CM-6212 H1-I User and Installation Guide
Note:
The capital letters: R, N, A, (A0), M, (M0) followed by an underscore, appear at the beginning of
the file name. They denote the type of recording.
·
R - Regular (always or schedule)
·
N - Network failure
·
M - Motion, (M0 refers to the first motion window trigger)
·
A - Alarm (A0 refers to the first alarm trigger input).
·
Download – To open/download a video clip, first select the file and then click DOWNLOAD . The
selected file window pops up as shown below. Click the AVI file to play the video in the player or
download it to a specified location. See Figure:
Selected File Window .
9.3.5.3 Recording
The Recording screen is used to select a device and to set a schedule for recording clips. Up to 10
schedules can be set.
In the Recording Storage section, select the recording device: SD Card or Network Share .
Note:
It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to
support long term continuous data read/write. Contact the manufacturer of the microSD card for
information regarding its reliability and life expectancy.