FLIR Quasar Gen II Series CM-6212 H1-I, User And Installation Manual, Page: 113 / 146

107 September 6, 2017
Configuration and Operation
CM-6212 H1-I User and Installation Guide
·
H.264-1 – The setting range for the H-264-1 Frame Rate at 4000x3000 is from 1 to 20 fps
(PAL/NTSC).
·
H.264-2 – The setting range for the H-264-2 Frame Rate is from 1 to 15 fps (PAL/NTSC) for Stream
1. The maximum resolution and frame rate for Stream 2 is 1920x1080 @ 12/15 fps (PAL/NTSC).
·
H.264-3 – The maximum frame rate for Stream 1 is from 1 to 20 fps (PAL/NTSC). The maximum
resolution and frame rate for Stream 2 and Stream 3 is 1280x720 @ 12/15 fps (PAL/NTSC).
·
H.264-4 – The maximum frame rate for Stream 1 is from 1 to 20 fps (PAL/NTSC). The maximum
resolution and frame rate for Stream 2 and Stream 3 is 1280x720 @ 12/15 fps (PAL/NTSC). The
maximum frame rate for Stream 4 is 720x480/576 @ 12/15 fps (PAL/NTSC).
Click SAVE to confirm the settings.
Note:
Images can be sent by FTP or email only when MJPEG steaming is selected as one of the streams.
9.4.5 Video Mask
From the Video Mask screen, you may select up to five rectangular portions of the View Area to ‘Mask.’
Below is an illustration with one mask displayed in the View Area.
Video Mask Screen
Active Mask Function
When a Video [Privacy] Mask is turned on, the area within the mask or box is blocked out or obscured
from view.
To enable a mask
1. Check a Video Mask checkbox. A red frame is displayed in the Live Video pane on the right side.
2. Use the mouse to drag and drop, adjust the mask’s size, and place it on the target zone.
Note:
It is suggested to set the Video Mask twice as large as the object it covers.