FLIR QUASAR CP-3211, User And Installation Manual, Page: 131 / 164

123
September 12, 2016
Configuration and Operation
CP-3211/CP-4221 User and Installation Guide
Click One Push to set the camera’s white balance to the current lighting condition as a reference point.
Click the Trigger when you are ready to activate the One Push function.
Set
Click Set after selecting the settings.
Zoom
Select Wide or Tele . Then drag the cursor on the Zoom bar to set the zoom level, which is displayed in the
window ( x1..x30 ).
Focus
Select one of the following settings: Auto, Manual, Near, or Far .
9.5.10 Camera - Misc1
Camera – Misc1 screen on all units except the CP-4221-30x
On all units except the CP-4221-300 and CP-4221-301, the following camera parameters set on the
Camera-Misc1 page:
§ Back light compensation (BLC)
§
Sharpness
§ Exposure compensation (ExpComp)
§
Flip
§ Digital zoom
§
Speed by zoom
§ ICR function
§
ICR Threshold