flir.com/security/pro
Package Contents
• 5MP Fisheye Network Dome Camera
• 3× Mounting Screws & Drywall Anchors
• Allen Key
• Mounting Template
• RJ45 Cap
QUICK START GUIDE
English Version 2.0
FLIR Systems, Inc., Copyright © 2018
As our products are subject to continuous improvement, FLIR Systems
Inc. reserves the right to modify product design, specifications and
prices, without notice and without incurring any obligation. E&OE
flir.com/security/pro
VISIT
Compatible Accessories
IT’S ALL ON THE WEB!
FCC Notice
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
N258F5_QSG_EN_R2
This security camera has several mounting options:
Safety Precautions
• Use an appropriate low-voltage power cable to prevent
fire or electrical shock.
• Make sure to install the camera in an area that can
support the camera weight.
• There are no user-serviceable parts inside the camera.
Please do not disassemble the camera.
• Do not clean the lens cover with abrasive cleaning
materials. Please use a soft cloth to clean the lens cover.
• Camera is rated for outdoor use (IP67), but is not
intended for submersion in water.
• Extend the Ethernet-cable run for your camera up to
300ft. You can use an RJ45 coupler or network switch
to connect male ends of Ethernet cable together. A
maximum of 3 connections is recommended.
Weight & Dimensions
4.3” / 110mm
2.2” /
56mm
0.9lbs / 0.4kg
Weight
Accessories
Model Numbers
Junction Boxes
S1JF4G
or
S4JF2G
Wall Mount
S1WA2G
Pole Mounts
S4PA2GS
with
S1WA2G,
or
S4PA2GS
with
S1JF4G,
or
S4PA2GS
with
S4JF2G
Corner Mounts
S1RA2G
with
S1WA2G,
or
S1RA2G
with
S1JF4G,
or
S1RA2G
with
S4JF2G
Using the RJ45 Cap (Optional)
ATTENTION:
The supplied RJ45 cap is weather-resistant. Seal the cap with
silicone if it will be exposed to precipitation regularly.
Cap housing
RJ45 plug
Outer seal
Inner seal
Cap-sealing nut
Ethernet connector
1. Fit the outer seal over your camera’s Ethernet connector and insert
the inner seal into the cap housing.
2. Run the stripped end of an Ethernet cable through the parts of the
RJ45 cap, as shown above.
3. Terminate the Ethernet cable with an RJ45 plug, and plug the cable
into your camera’s Ethernet connector.
4. Screw the cap housing onto the Ethernet connector.
5. Screw the cap-sealing nut tightly into the cap housing.
5MP Fisheye Network
Dome Camera
MODEL:
N258F5 SERIES
