3. Configure the schedule as needed:
• Check
Continuous
,
MD
(motion detection),
Alarm
, or
Alarm & MD
to select the re-
cording type you would like to configure.
• Click and drag on each day to customize the recording schedule. The schedule is
set up as a grid, which each block representing one hour.
• Click
next to All to link the recording schedules for all days. The icon for a day
changes to
when days are linked. You can also click the boxes next to individ-
ual days to link them to each other. If the recording schedule is linked, changes
made to one of the days will apply to every day that is linked.
• Click
to disable all recording of the selected type on the selected day.
• Click
if you need to set a more precise schedule down to the minute.
4. Click
OK
to save changes.
16.3.15
Configuring Pre-Recording
The system can pre-record video when motion detection events occur.
To configure pre-recording:
1. From the Main Menu, click
and then click
Storage>Schedule>Record
.
2. Under
Channel
, select the camera you would like to configure or select
All
.
3. Under
PreRecord
, select the duration for pre-recording.
4. Click
OK
to save settings.
#LX400057; r. 1.0/24460/24461; en-US
61