6.5. Nuclide Visibility
FLIR Detection
Usage
Specify if you want the usage of an identi ied nuclide shown or hidden in identi ication results
(for details refer to
6.6
, p.
119
or
C
, p.
259
).
Severity
Specify if you want the severity of an identi ied nuclide shown by icons or hidden in identi i-
cation results (for details refer to
6.7
, p.
120
or
C
, p.
259
).
I
Innocent
S
Suspicious
T
Threatening
U, Pu
Specify whether all uranium isotopes and all plutonium isotopes, respectively, should be
identi ied together as element (uranium) or separately as nuclides (
235
U,
238
U, etc.).
Down
,
Select
Choose and select menu items, see
2.2.2
, p.
35
for details.
+
,
-
,
Accept
,
Cancel
Edit values, see
2.2.3
, p.
37
for details.
Exit
Return to the superior menu.
6.5
Nuclide Visibility
Options Menu (p.
ä
More Options (p.
)
ä
Identi cation Options (p.
)
ä
Nuclide Visibility
Settings (p.
ä
Nuclides (p.
Built into the FLIR identiFINDER R300 is a library used to identify the nuclides causing gamma ra-
diation. Please refer to Appendix
C
, p.
259
for further information about the nuclides in this library.
You can specify which nuclides should be included in the display of identi ication results (Fig-
ure
124
, p.
119
).
Settings and Commands
Nuclides…
Choose one from the list of nuclides to specify whether you want it to be shown or suppressed
in identi ication results.
Suppressed nuclides are reported as “Unknown” if recognized by the identi ication algorithm.
Skip
Cycle the list of commands (see
2.2.1
, p.
35
).
118
identiFINDER
®
R300/en/2014.4(13623)/Feb2015
