FLIR gS125 inverted, Installation Instructions Manual

Page: 44 / 102

4.14 Radar network connection
Radar units are connected to the SeaTalk
hs
network,
usually via a Raymarine ® network switch. On
smaller systems the Radar may be connected
directly to the display’s network connection.
Radar connected via network switch
D12252-3
4
2
1
5 6
3
1. Radar scanner
2. Raymarine ® network switch
3. MFD
4. RayNet Radar cable
5. VCM (Voltage Converter Module) — (required
for Open Arrays)
6. Power connection
Radar connected directly to the display
D12253-3
4
1
2
3
1. Radar scanner
2. MFD
3. Network connection to MFD ( RayNet Radar
cable)
4. Power connection
Note: Open array scanners require a VCM.
RJ45 SeaTalk hs Radar cable connection
To connect a Radar using an RJ45 SeaTalk hs Radar
cable additional accessories are required.
1
2
3
4
D12884-2
1. RJ45 SeaTalk hs Radar cable
2. MFD
3. Network connection to MFD ( RayNet to RJ45
SeaTalk hs adaptor cable)
4. SeaTalk hs crossover coupler
44
gS Series installation instructions