FLIR GFx320, User Manual

Page: 51 / 164

Camera parts 14
14.7 Laser pointer
14.7.1 General
The camera has a laser pointer. When the laser pointer is on, you will see a laser dot ap-
proximately at the target.
14.7.2 Figure
This figure shows the difference in position between the laser pointer and the optical cen-
ter of the infrared lens. The laser pointer and the optical axis are parallel.
WARNING
Do not look directly into the laser beam. The laser beam can cause eye irritation.
Note The symbol is displayed on the screen when the laser pointer is on.
14.7.3 Laser warning label
A laser warning label with the following information is affixed to the camera:
14.7.4 Laser rules and regulations
Wavelength: 635 nm. Maximum output power: 1 mW.
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007.
#T810169; r. AN/42241/42268; en-US 39