FLIR FLIR T5 series, User Manual

Page: 100 / 115

Camera settings 23
• Delete all saved files... : This displays a dialog box where you can choose to perma-
nently delete all the saved files (images and videos) from the memory card or to can-
cel the delete action.
23.5 Device settings
• Language, time & units : This submenu includes settings for a number of regional
parameters:
◦ Language .
◦ Temperature unit .
◦ Distance unit .
◦ Time zone .
◦ Date & time .
• Focus : This submenu includes the following settings:
◦ Autofocus : When autofocusing, the infrared camera can use one of the following
focus methods:
– Contrast : The focus is based on maximizing the image contrast.
– Laser : The focus is based on a laser distance measurement. The laser is on
when the camera is autofocusing.
◦ Continuous autofocus : This setting is used to enable/disable continuous autofocus.
• Display settings : This submenu includes the following settings:
◦ Screen rotation : This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
◦ Image overlay information : This setting specifies what image information the cam-
era will display as an overlay on the image. For more information, see section 6.5.6
Image overlay information . You can select the following information to display:
– Compass .
– Date & time .
– Emissivity .
– Reflected temperature .
– Distance .
– Relative humidity .
– Atmospheric temperature .
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness : This submenu is used to control the brightness of the screen.
– Auto : Enable/disable automatic adjustment of the screen brightness.
– Slider: Manual adjustment of the screen brightness.
Note You can also control the screen brightness on the swipe-down menu. For
more information, see section 6.5.5 Swipe-down menu .
• Geolocation : This submenu includes the following settings:
◦ GPS : This setting is used to enable/disable the GPS.
◦ Compass : This setting is used to enable/disable the compass and to calibrate the
compass. For more information, see section 7.13 Calibrating the compass .
• Lamp & laser : This submenu includes the following settings:
◦ Enable lamp & laser : This setting is used to enable the camera lamp and the laser.
◦ Enable lamp & laser + Use lamp as flash : This setting is used to enable the flash
function. When the flash function is enabled, the camera lamp will flash when an
image is saved.
#T810253; r. AL/84068/84441; en-US 93