Quick Start Guide
Connections to a Raymarine MFD
The AX8 can be powered using the supplied PoE injector,
alternatively, it can also be powered by a Raymarine MFD /
network switch capable of providing power over ethernet (PoE).
Up to 8 AX8 cameras can be networked together.
Raymarine LightHouse MFD with PoE
Raymarine LightHouse MFD
Class 2
PoE device
12 V / 24 V dc
12 V / 24 V dc
12 V / 24 V dc
12 V / 24 V dc
Raymarine LightHouse MFD
Max.
x8
55 mm (2.17 in)
25.6 mm (1.00 in)
80 mm (3.15 in)
13.5 mm
(0.53 in)
LED
Camera
IR
Ethernet and PoE
25.6 mm (1.00 in)
Reset
Ethernet
Diagnostics LED
Power
Diagnostic LED
60 mm (2.36 in)
125 mm (4.33 in)
Surface mounting holes 106 mm (4.17 in)
14 mm
(0.55 in)
Camera fixing
68 mm (2.68 in)
FLIR Ram mount 47 mm (1.85 in)
7 mm
(0.28 in)
20 mm (0.79 in)
5 mm
(0.20 in)
12 mm
(0.47 in)
37 mm (1.46 in)
52 mm (2.05 in)
Powered by PoE injector
12 V / 24 V dc
Class 2
PoE device
88050-3-EN
09-2015
Date:
Document number:
Set-up
The AX8's built-in web interface MUST be used to align the thermal and visible images before using
Thermal MSX
®
mode and to set-up spot alarms. The web interface also provides access to other
features and settings not available on your MFD.
Connect the AX8 to your MFD
network and ensure it is powered.
When using the camera in
Thermal MSX
®
mode,
you can use the "Adjust Distance" slider control in
the web interface to adjust the overlay position of
the visible Vs. the thermal image.
Raymarine LightHouse MFD
Powered by
PoE injector
12 V / 24 V dc
Class 2
PoE device
Obtain the AX8's IP address, this can be found
by accessing the AX8's diagnostics page using
a Raymarine LightHouse MFD.
Homescreen > Set-up > Maintenance >
Diagnostics > Select Device > AX8
.
Scroll down to Networks, the IP address is
part of the RTSP URL.
EXAMPLE
rtsp://
10.22.0.32
/avc
Select the Spot alarm icon
to add a new spot to the
image, drag the spot to the
required position and then
set the temperature alarm
by selecting the bell icon.
PC / Smartphone / tablet
Wi-Fi
Connect your PC or smart
device to the MFD network.
For information on connecting a
PC or smart device to your
Raymarine MFD network,
refer to the
LightHouse
Operation instructions
(81360).
Refer to the FLIR AX Series user
manual (
T559913)
, available on the
supplied CD for full details of the
features and settings available
from the web interface.
EXAMPLE
Default logon:
Username:
admin
Password:
admin
Enter the AX8's IP address in the web browser's
address bar on your conntected PC or smart device.
Alternatively you can connect the AX8 directly to a
PC using an ethernet (RJ45) cable.
To obtain the AX8's IP address using a PC download
and install the
FLIR IP Config
tool version 1.9 or greater.
5
1
2
3
4
6
Potential ignition
source
The
PoE injector
is NOT
approved for use in hazardous/
flammable atmospheres. Do
NOT install in a hazardous/
flammable atmosphere (such as
in an engine room or near fuel
tanks). In this scenario, you can
use a female to male RJ45
adapter cable (available separately)
to extend the cable run between
the AX8 and the PoE injector.
