427-0033-00-12 Version 110
February 2019
21
This document does not contain any export-controlled information.
Basic Operation and Configuration
changes (with the Save Settings button at the bottom of the page) if it is desirable to use the new
settings as a default when the camera is powered on.
When a user logs in as
admin
, a complete
Maintenance
). The
Maintenance
menu also provides access to other configuration options.
2.3.3
Maintenance Menu > Server Page
The basic camera configuration steps are accessed through the
Maintenance
menu, using the
Server
page. When a user logs in as
expert
or
admin
the
Server
page is available. The
LAN
Settings
,
Date and Time
,
Server Status
, and
Security Options
selections are described below.
LAN Settings
If the IP address of the camera is changed, the PC may no longer be on the same network and may
not be able to access the camera. Also refer to
Set IP Address using the FLIR Discovery Network
When the LAN settings are changed and the Save
button is clicked, a pop-up message will appear to
indicate the network interface should be restarted.
Once all the changes have been made and saved,
click on the
Restart Network
button at the bottom of
the page.
