FLIR Exx series, User Manual

Page: 44 / 278

Handling the camera 10
10.7 Saving an image
Follow this procedure:
1. To save an image, pull the trigger.
Note Depending on the settings in ( Settings ) > Save options & storage , the following
may happen:
• A preview image is displayed before the image is saved.
• An annotation tool or the annotation menu is displayed when the image has been
saved.
10.8 Operating the laser distance meter
10.8.1 General
The laser distance meter consists of a laser transmitter and a laser receiver. The laser dis-
tance meter determines the distance to a target by measuring the time it takes for a laser
pulse to reach the target and return to the laser receiver. This time is converted to a dis-
tance, which is displayed on the screen.
The laser receiver also works as a laser pointer. When the laser distance meter is on, you
will see a laser dot approximately at the target.
WARNING
Do not look directly into the laser beam. The laser beam can cause eye irritation.
#T810190; r. AI/41890/41890; en-US
32