FLIR E75, User Manual

Page: 109 / 300

Recording video clips 20
20.1 General
You can record and save video clips to the memory card.
Note The camera can be configured to save video in *.mpg or *.csq format. Select
( Settings ) > Save options & storage > Video compression .
• Mpeg (*.mpg) : Mpeg recordings cannot be edited after the file has been saved.
• Radiometric storage (*csq) : A *.csq file supports full radiometry but is only supported
by FLIR Systems software. The file does not include any visual image information. With
this setting, only
Thermal image mode is supported when recording video. If any other
image mode is active when Video recording mode is selected, the camera will auto-
switch to Thermal image mode.
20.2 Procedure
Follow this procedure:
1. Push the navigation pad to display the menu system.
2. Select ( Settings ) and push the navigation pad. This displays the Settings menu.
3. Use the navigation pad to select Recording mode > Video .
4. Push the back button to exit the Settings menu.
5. To start a recording, pull and release the trigger. A counter at the top of the screen dis-
plays the duration of the recording.
6. To stop a recording, pull and release the trigger. The recording is automatically saved
to the image archive.
20.3 Playing a saved video clip
Follow this procedure:
1. Push the image archive button . This displays the Gallery with one or more folders.
2. Select a folder and push the navigation pad.
3. Select the video clip you want to play and push the navigation pad.
#T810190; r. AJ/46209/46209; en-US
97