FLIR E70353, Nstallation & Operation Instructions

Page: 98 / 104

10.4 RayNet to RJ45 adapter cables
Description Typical use Quantity
1
Adapter cable with a
RayNet (female) socket
on one end, and a
waterproof (female)
socket on the other end
accepting the following
cables with an
RJ45
SeaTalk hs waterproof
locking (male) plug:
• A62245 (1.5 m).
• A62246 (15 m).
A typical use for this adapter cable is to
connect a
DSM300 sonar module to a
LightHouse MFD, using all-waterproof
cable connections. This adapter cable
will also accept the following
RJ45
SeaTalk hs cables, although the RJ45
plug that connects at the equipment end
(e.g.
DSM300 ) will NOT be waterproof:
• E55049 (1.5 m).
• E55050 (5 m).
• E55051 (10 m).
• A62135 (15 m).
• E55052 (20 m).
1
2 Adapter cable with a
RayNet (female) socket
on one end, and a
waterproof (female)
RJ45
socket on the other end,
along with a locking
gland for a watertight fit.
Directly connect a Raymarine radar
scanner with an
RJ45 SeaTalk hs (male)
cable to a RayNet network switch (e.g.
HS5 ) or LightHouse MFD.
1
3 Adapter cable with a
RayNet (male) plug on
one end, and an RJ45
SeaTalk
hs
waterproof
(male) plug on the other
end.
Connect a legacy G-Series GPM-400 ,
C-Series Widescreen or E-Series
Widescreen MFD to a Raymarine radar
scanner supplied with a
RayNet power /
data cable.
1
98