FLIR E70353, Nstallation & Operation Instructions

Page: 73 / 104

E70353 1234 ). For example, in Windows XP, the camera is listed in Windows
Explorer under “My Network Places”; in later versions of Windows, the camera is
listed in Windows Explorer under “Network”.
Note: If the camera is not listed in Windows Explorer under “My Network Places”
(Windows XP) or “Network” (later versions of Windows), you may need to set a
static IP address for the camera. See ###cross-ref###.
4. For Windows computers, double-click the camera item to open the camera’s web
page. You can also right-click the camera item and select
Properties , to show
more information about the camera, including its IP address.
Logging in to the Web browser user interface
You can log in to the camera’s Web interface using one of three User Names: user ,
expert, or admin . By default, the passwords are: user , expert , and fliradmin ,
respectively.
• The user login can access the Live Video page and control the camera.
• The expert login can access the Setup menus and make configuration changes
to the payloads and other components.
• The admin login can access the Maintenance menu and all the other menus as well
as change the login passwords.
You should change the default login passwords to prevent unauthorized log in.
Note: Only two web sessions can be active at once.
To log in:
1. Go to the camera’s web page by:
• entering the camera’s IP address directly into the address bar of your web
browser, OR
• double-clicking the camera in “My Network Places” (Windows XP) or “Network”
(later versions of Windows).
(See Setting Setting
Setting up
up
up a
a
a netw
netw
netw ork
ork
ork connection
connection
connection
to to
to the
the
the camer
camer
camer a
a
a
for more information.)
The login screen with a picture of the camera is displayed.
2. Select a different language if desired.
3. Enter
user for User Name and user for Password, then click Log in.
The Live Video page is displayed.
System operation and setup
73