81
March 10, 2019
Accessing the CM-330X via a Web Browser
CM-3304/CM-3308 User and Installation Guide
This section is used to configure the duration of a loitering event in order for a rule to be triggered. This can
be changed from the default of 30 second by dragging the slider or typing a number into the text box.
See the following sections for more information on Advanced options and Analytics actions (completion of
rule configuration)
The
Video Analytics > Area Protection
screen is used for configuring the area detection analytic
capability.
This page allows you to:
·
Configure a detection area using 3 to 8 points
·
Specify directional preference to detect people leaving or entering desired area
·
Reset Max and Min Object size
·
Configure advanced settings, including sensitivity, area masking, reset scene and arming schedule
·
Analytics actions
Use the Area Protection rule to secure an area against any incoming or outgoing traffic (humans or
vehicles). For example, a secluded or cordoned area, such as a police controlled zone.
Draw a line around the designated zone, forming a closed shape. Allow some space before the point of
entry for the camera to process and analyze objects as they near the line.
See the
section for more information on the setup process:
Zone Settings:
This section allows the user to create an area using between 3 and 8 points in order to configure the
desired space
Clicking on the video scene will produce points for area creation. Once three points are selected, a full area
will appear. Clicking more, will create more points creating more complex shapes. After 5 points are
created, 3 more can be added by clicking on individual lines, allowing for more specific shapes.
