March 10, 2019
36
Accessing the CM-330X via a Web Browser
CM-3304/CM-3308 User and Installation Guide
To change the date and time
1.
Select one of the following options
·
Manual Settings
– Enter the date and time in the respective field.
·
Synchronize with PC
– Enter the date and time in the respective field.
·
Synchronize with NTP Server
– Selecting this option opens the
NTP Settings
section:
Figure 38: NTP Setting Section
a. Enter the following details in the
NTP Setting
section:
·
Enable –
From the drop-down list, select
Manua
l to set the NTP server manually,
or
From DHCP Server
to set the time according to the network DHCP server.
·
Server Address –
Enter the IP address for the NTP server.
·
Synchronization Period –
Select a number between
1-24
for the frequency (in
number of hours) that the camera will synchronize with the NTP time server (i.e.,
every one hour, every two hours, etc.).
2.
In the
Time Zone Setting
section, from the
Area
drop-down list, select your local time zone.
3.
Click
Save
. The new time is displayed in the
Current Camera Time
text box.
5.3.1.2.2 Audio
The
Audio
screen is used for configuring
Audio In
settings.
Figure 39: Basic Configuration > Audio Screen
To enable audio settings
1.
From the
Enable
drop-down list, select
ON
.
2.
From the
Encoding
drop-down list, select
G.711 a-law, G.711 µ -law,
or
AAC.
The
default is
AAC.
3.
From the
Level
drop-down list, select
High, Mid,
or
Low.
