FLIR CF-5212, User And Installation Manual, Page: 84 / 132

Configuration and Operation
74 CF-5212/CF-5222 User and Installation Guide April 25, 2017
Video OCX protocol setting options include:
RTP over UDP
RTP over RTSP (TCP)
RTSP over HTTP
MJPEG over HTTP
Multicast mode
– Enter in each field all required data, including
Multicast H.264 Video Address
and Port, Multicast MJPEG Video Address, Multicast Audio Address, and Multicast TTL . The
default Multicast TTL (time-to-live) setting is 1 , which prevents multicast datagrams from being
forwarded beyond a single sub-network.
Click SAVE to confirm the settings.
Video Frame Rate
From the Video Frame Rate screen, you can specify the frames per second (fps) for each video
compression format.
Figure 64: Video Frame Rate Screen
MJPEG/H.264 Frame Rate Setting
The default setting of the MJPEG and H.264 frame rate is 30 fps in NTSC and 25 fps in PAL. Settings
are:

PAL: 1, 5, 13, and 25 fps

NTSC: 1, 2, 3, 6, 7.5, 10, 15, and 30 fps
Note:
A lower frame rate decreases video smoothness.
Click SAVE to confirm the settings.
Note:
Images can be sent by FTP or email only when MJPEG steaming is selected as one of the streams.