FLIR CB-3102, User And Installation Manual

Page: 86 / 104

Accessing the CB-3102 via a Web Browser
78 Ariel CB-3102 User and Installation Guide July 21, 2016
In the Day/Night Switch Control section, configure the following settings:

Mode
– See the explanation in the
Auto Mode section above.

Time
– See the explanation in the
Auto Mode section above.

Sensitivity
– See the explanation in the
Auto Mode section above .
In the IR Control section, configure the following settings:

Mode
– See the explanation in the
Auto Mode section above.

LED Brightness
– See the explanation in the
Auto Mode section above.
Click Reset if you want to return to factory default settings.
6.3.3.1.5 Manual Mode
Manual mode opens the iris completely with a fixed gain. This mode should only be used in indoor
scenes with consistent lighting. Manual mode requires the user to set fixed values for shutter and gain
levels. Increasing the value of the fixed shutter increases the amount of light entering the sensor, which
allows a brighter and more detailed image. In a similar manner, utilizing gain and increasing its level
increases the sensitivity of the image sensor, which brightens the image and add details. This increases
the level of noise in the image.
Figure 93: Manual Exposure Mode Settings
Continue to configure the other settings in the Exposure section:

Shutter Speed
– Select the shutter speed from the following options:
Manual
Shutter Speed
Manual
Shutter Speed
PAL NTSC PAL NTSC
1/25 1/30 1/1000 1/1000
1/50 1/60 1/2500 1/2500
1/100 1/120 1/5000 1/5000
1/250 1/250 1/10000 1/10000
1/500 1/500