5 Blackfly S Physical Interface
5.8
Mounting
Using the Case—Cased Models
The case is equipped with the following mounting holes:
n
Two (2) M2 x 2 mm mounting holes on the top of the case
n
Three (3) M3 x 2.5 mm mounting holes on the bottom of the case
n
Four (4) M2 x 2 mm mounting holes on the bottom of the case that can be used to attach the camera directly to
a custom mount or to the tripod mounting bracket
Using the Mounting Bracket—Cased Models
The tripod mounting bracket is equipped with four (4) M2 mounting holes.
Tripod Adapter Dimensions—Cased Models
Tripod Adapter Dimensional Diagram
Using the Mounting Holes—Board-level Models
Four mounting points are provided using M2 through holes. Additionally, an indexing key is available on the imager
board. When designing a mounting bracket, respect the
Keepout Layer—Board-level Models
.
Board-level Diagram
2/19/2019
©2015-2019 FLIR
Integrated Imaging
Solutions Inc.
All rights reserved.
FLIR Blackfly
®
S Installation Guide
26
