FLIR B6 series, User Manual

Page: 158 / 326

22.3.5 Changing settings for the laser
Procedure
Follow this procedure to change settings for the laser:
To go to the mode selector, push the button to the right of the joystick.
1
In the mode selector, select Setup and push the joystick.
2
In the toolbox, select Laser . 3
The camera has three laser settings:
■
Focus : The camera will continuously autofocus on the laser dot.
■
Set level : The camera will set the image level to the temperature of the
object at the laser dot.
■
Sticky spot : A spot will be placed at the position of the laser dot, which
will then move with the laser dot and remain in position when the laser
pointer is deactivated.
4
To confirm and leave the dialog box, push the button.
5
Related topics
For locations of camera buttons, see section 9 – Camera parts on page 21.
NOTE The features in Step 4 will only work if the laser beam is clearly reflected to the camera.
22
140
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
22 – Changing settings