FLIR B6 series, User Manual

Page: 151 / 326

22.2 Changing settings for camera behavior
22.2.1 Changing the number of measurement tools
General
You can change the maximum number of measurement tools that you want to simul-
taneously use on the screen.
The reason for reducing the number of measurement tools is to make working with
the preferred measurement tools more efficient.
Procedure
Follow this procedure to change the number of measurement tools:
To go to the mode selector, push the button to the right of the joystick.
1
In the mode selector, select Setup and push the joystick.
2
In the toolbox, select Tools . 3
For each measurement tool, do the following:
1 To enter edit mode, push the joystick.
2 To change the number, push the joystick up/down.
3 To confirm each choice, push the joystick.
4
To confirm and leave the dialog box, push the button.
5
Related topics
For locations of camera buttons, see section 9 – Camera parts on page 21.
22
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011
133
22 – Changing settings