FLIR 72501-0101, User Manual

Page: 89 / 146

Working with measurement tools 18
A P next to the measurement tool on the screen indicates that local parameters have
been activated for the tool.
Follow this procedure:
1. To select the measurement tool, touch the tool on the screen. The tool is now dis-
played with one or more handles.
2. Push the joystick—or touch and hold the tool. This displays a context menu.
3. Select ( Use local parameters ).
4. Push the joystick. (icon with unfilled indicator) is displayed.
5. Push the joystick to activate the use of local parameters. (icon with filled indica-
tor) is displayed together with a submenu.
6. Use the joystick to select one or more of the local measurement parameters.
7. Push the joystick to display a dialog box.
8. Use the joystick to change the parameter.
9. Push the joystick. This closes the dialog box.
10. When completed, push the joystick and select ( Done ).
11. Push the joystick to confirm and exit the menu mode.
Note When you select another measurement tool, the local parameters are reset. If
you wish to keep the local parameter settings, use the user preset feature, see section
18.3
Editing user presets , page 71.
18.5.5 Related topics
For in-depth information about parameters, and how to correctly set the emissivity and
reflected apparent temperature, see section , page .
18.6 Displaying values in the result table
18.6.1 General
For the box, circle, and line tools, you can set the camera to display the maximum, mini-
mum, and average values in the result table.
#T559954; r. AT/65353/65353; en-US 75