FLIR 72501-0101, User Manual, Page: 112 / 146

Inspection Route 23
9. When the inspection route is completed, make sure to copy the XML file on the mem-
ory card to a computer for future use. When you start an inspection in the camera,
the inspection data will be written to the XML file on the memory card.
23.5.2 Manually editing an XML file
An example or empty XML file can be created on the memory card in the camera. This
file can be used as a basis when manually editing an XML file.
1. Make sure that there is no inspection route XML file on the memory card.
2. Select ( Settings ) > Save options & storage > Inspection route > Getting started .
3. Select one of the following:
• Create an example Inspection route : This creates an example XML file with a mul-
ti-level structure on the memory card.
• Create an empty Inspection route : This creates a basic XML file on the memory
card.
4. Transfer the example XML file to a computer for editing.
#T559954; r. AT/65353/65353; en-US 98