VIEWCOM/E MAX+ Web page
> About the Web page of VIEWCOM/E MAX+
11
3. VIEWCOM/E MAX+ Web page
About the Web page of VIEWCOM/E MAX+
The web page of VIEWCOM/E MAX+ has the following remote functions:
To go to the Web page of VIEWCOM/E MAX+
1
Verify that JAVA Virtual Machine (V1.6.0 or later) is installed on the PC.
To install: see
2
Verify that the PC and VIEWCOM/E MAX+ are in the same network range.
3
Open the Web browser and enter the IP address of VIEWCOM/E MAX+.
Function
Tasks / Information
Via the Web page menu
• Monitor the detector boards
Image of each detector board + Active events
Count, speed and occupancy data of the last 10 min
from each detector board (table or graph)
Detector Status
Real-time Data Analysis
• Set up the detector boards and
the VIEWCOM/E MAX+
VIP Setup Module
Board Setup
• Service VIEWCOM/E MAX+
Board reset, password protection, system logging
System Setup
• Help
Shows the VIEWCOM/E MAX+ setup guide
Setup guide
The web page of VIEWCOM/E MAX+
