FLIR 00723193774298 Installation & Operation Instructions Download Page 12

Page: 12 / 124

2.1 Document information

This document contains important information
related to the installation of your Raymarine product.

The document includes information to help you:

• plan your installation and ensure you have all the

necessary equipment;

• install and connect your product as part of a wider

system of connected marine electronics;

• troubleshoot problems and obtain technical

support if required.

This and other Raymarine product documents
are available to download in PDF format from

www.raymarine.com

Applicable products

This document is applicable to the following products:

Part number

Name

Description

E70328

p70s

SeaTalk

button pilot
controller
(Sail)

E70329

p70Rs

SeaTalk

Rotary pilot
controller
(Power)

Software revision

Raymarine regularly updates product software to
add new features and improve existing functionality.

This document covers Pilot controller software —

LightHouse

Version 3.xx, which should be used in

conjunction with EV and ACU software version 2.xx.

Please refer to the

Software Releases

section for

details on software releases.

Check the

Raymarine

website to ensure you have

the latest software and user manuals:

•

www.raymarine.com/software

•

www.raymarine.com/manuals

Product documentation

The following documentation is applicable to your
product:

Description

Part number

p70s / p70Rs Installation and operation
instructions

88057 / 81365

p70s / p70Rs Mounting template

87260

Additional handbooks

Description

Part number

SeaTalk

ng®

reference manual

81300

SeaTalk

ng®

converter

87121

Document illustrations

Your product may differ slightly from that shown
in the illustrations in this document, depending on
product variant and date of manufacture.

All images are provided for illustration purposes only.

p70s / p70Rs

Summary of Contents for 00723193774298





























































































































Search results

Summary of Contents for 00723193774298

Reviews:

Brands by name

Popular brands

FLIR 00723193774298, Installation & Operation Instructions

Search results

Summary of Contents for 00723193774298

Reviews:

Brands by name

Popular brands