flir.com/security/pro
Package Contents
• 8MP Fixed Network Eyeball Dome Camera with Audio
• Mounting Kit*
• RJ45 Cap*
• Allen Key*
* Per camera in multi-camera packs.
Compatible Accessories
For a full list of compatible accessories, visit
flir.com/security/cameramounts
.
QUICK START GUIDE
English Version 1.0
FLIR Systems, Inc., Copyright © 2018
As our products are subject to continuous improvement, FLIR Systems
Inc. reserves the right to modify product design, specifications and
prices, without notice and without incurring any obligation. E&OE
flir.com/security/pro
VISIT
IT’S ALL ON THE WEB!
FCC Notice
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
N253EA8_QSG_EN_R1
Safety Precautions
• Use an appropriate low-voltage power cable to prevent
fire or electrical shock.
• Make sure to install the camera in an area that can
support the camera weight.
• There are no user-serviceable parts inside the camera.
Please do not disassemble the camera.
• Do not clean the lens cover with abrasive cleaning
materials. Please use a soft cloth to clean the lens cover.
• Camera is rated for outdoor use (IP67), but is not
intended for submersion in water.
• Extend the Ethernet-cable run for your camera up to
300ft. You can use an RJ45 coupler or network switch
to connect male ends of Ethernet cable together. A
maximum of 3 connections is recommended.
Using the RJ45 Cap (Optional)
ATTENTION:
The supplied RJ45 cap is weather-resistant. Seal the
cap with silicone if it will be exposed to precipitation
regularly.
Cap housing
RJ45 plug
Outer seal
Inner seal
Cap-sealing nut
Ethernet connector
1. Fit the outer seal over your camera’s Ethernet connector
and insert the inner seal into the cap housing.
2. Run the stripped end of an Ethernet cable through the
parts of the RJ45 cap, as shown above.
3. Terminate the Ethernet cable with an RJ45 plug, and plug
the cable into your camera’s Ethernet connector.
4. Screw the cap housing onto the Ethernet connector.
5. Screw the cap-sealing nut tightly into the cap housing.
8MP Fixed Network Eyeball
Dome Camera with Audio
MODEL:
N253EA8 SERIES
