Flintec FT-111 AN, Technical Manual

Page: 140 / 146

FT-111(D) Panel Weighing Indicator, Technical Manual, Rev.1.0.0, May 2019 Page 139 of 146
4 ± 3d
5 ± 4d
6 Disable
01000110 70 R/W Stability Time
(1) (2)
Refer to par. [517] page 61
01000111 71 R/W Unit
(1) (2)
0 g
1 kg
2 t
3 lb
4 No unit
5 N
6 kN
7 kLb
01001000 72 R/W Range
(1) (2)
0 Single range
1 2 x Multi Range
2 3 x Multi Range
3 2 x Multi Interval
4 3 x Multi Interval
01001001 73 R/W Capacity-1
(1) (2)
Refer to par. 523 on page 62
01001010
74
R/W
Decimal
point-1
(1) (2)
0 XXXXOO
1 XXXXXO
2 XXXXXX
3 XXXXX.X
4 XXXX.XX
5 XXX.XXX
01001011
75
R/W Increment-1
(1) (2)
0 X1
1 X2
2 X5
01001100 76 R/W Capacity-2
(1) (2)
01001101 77 R/W Decimalpoint-2
(1) (2)
01001110 78 R/W Increment-2
(1) (2)
01001111 79 R/W Capacity-3
(1) (2)
01010000 80 R/W Decimalpoint-3
(1) (2)
01010001 81 R/W Increment-3
(1) (2)
01010010 82 R/W
Limit of
Indication
(1) (2)
0 Over indication after Max
1 1 division more than Max
2 5 division more than Max
3 9 division more than Max
4 2% more than Max
5 5% more than Max
01010011 83 R/W Tare type
(1) (2)
0 Subtractive tare
1 Additive tare
01010100 84 R/W Maximum tare
(1) (2)
Refer to par. [526] page 62
01010101 85 R/W Secondary unit
(1) (2)
0 g
1 kg
2 t
3 lb
4 No unit
5 N
6 kN
7 kLb
Table 12-3 - Expanded Command List
(1) Write this command after writing values to Low Dword of RxPDO then apply this command with New CMD.
(2) To access the related value, read Low Dword of TxPDO.