manualshive.com logo in svg

FlightSafety LEARJET 45, Pilot Training Manual, Page: 454 / 539

Share
Download
FlightSafety LEARJET 45 Pilot Training Manual Download Page 454

– MAP/WX ranges are:  5, 10, 25, 50, 

100, 200, 300*

* Two additional ranges are available in

MAP/WX, 500 and 1000, when the

radar mode is selected to FP.

• Designator Symbol is an unfilled rect-

angle with a dashed line connecting the

box to the origination of the designator.

The designator is controlled by the cen-

ter pedestal mounted joystick and the

MFD bezel controller, discussed later in

this chapter.

• Bearing and Distance Readout is the mag-

netic bearing and distance from the ori-

gin of the designator dashed line to the

designator box.

• FMS MAP/PLAN symbols are charac-

teristic to standard instrument charts and

to the Primus 1000 avionics system

(Figure 16-41).

• Waypoints are symbolized as four pointed

stars, positioned at the Latitude and

Longitude of geographical locations, ref-

erenced to the present position of the air-

plane. The total number of flight plan

waypoints allowed for display is 10 (in-

cluding the "FROM" waypoint). A way-

p o i n t   c a n   a l s o   b e   i n c l u d e d   a s   a

pseudo-VOR. A flight plan can follow a

pseudo-VOR display if the subsequent

waypoint records are connected way-

points.

• Background navigation aids (VOR, DME,

co-located VOR/DME) examples are il-

lustrated in Figure 16-37. The navaids

are derived through the FMS data base and

are positioned in relation to the FMS de-

termined present position. A maximum of

eight navaids will plot on the MFD (4

VORs and 4 NDBs). NAVAIDs may also

be included in the flightplan and are in-

cluded in the total waypoint count (max-

i m u m   o f   1 0 ) .   NAVA I D   d i s p l a y s   a r e

selected or deselected with the NAV bezel

key on the MFD menu.

• Non-Directional Beacon (NDB) is sym-

bolized as an unfilled circle and repre-

sents the position of the NDB relative to

the airplane present position.

• Airports are displayed as a circle and rep-

resent the position of the airport symbol

relative to the present position. A maxi-

mum of four airports can be plotted on the

MFD. The airport identifier is displayed

to the right of the symbol. Airports dis-

plays are selected or deselected with the

APT bezel key on the MFD menu.

• Altitude Profile Points are displayed as

a diamond and represent the location for

a preplanned descent to a pre-determined

altitude. If they are included in the flight-

plan, they will be counted towards the

waypoint total. Disconnected altitude

profile points are limited to two.

L E A R J E T   4 5

P I L O T   T R A I N I N G   M A N U A L

16-70

FOR TRAINING PURPOSES ONLY

FlightSafety

international

S T A N D A R D  
I N S T R U M E N T
C H A R T S

P R I M U S   1 0 0 0

V O R T A C

V O R / D M E

T A C A N

D M E

V O R

V O R

A I R P O R T

T O C / T O D

W A Y P O I N T

N D B

Figure 16-41.   MFD MAP Symbols

Summary of Contents for LEARJET 45




























































































































































































































































































































































































































































































































































Reviews:

No comments