Rev:
J
Revision Date:
05/23/2014
Page 6 of 23
MAN
– FD171CV VER HD
Display Type
17.1” TFT Color LCD
Aspect Ratio
16:10
Native Resolution
1440 x 900 pixels
Maximum Supported Resolution
1920 x 1080 pixels
Brightness
250 cd/m
²
Contrast
800:1
Video Sources
1x VGA, 1x S-Video, 1x Composite,
2x HDMI
Composite Video Type Supported
PAL/NTSC
Power Consumption
28VDC @ 3 AMPS
Monitor Overall Size
16.250”(W) x 11.000”(H) x 1.750”(D)
Viewable Area
14.360”(W) x 8.950”(H)
Enclosure Materials
Aluminum
Weight
7.6 lbs
Certifications
DO-160 Sec. 21 Cat. B, PMA Approved
Installation Instructions
All cabin entertainment equipment, such as the FD171CV VER HD, should be installed on
a non-essential bus and have a dedicated circuit breaker. It is a requirement that a switch
be installed in the cockpit so that the pilot can de-energize the entertainment system should
it become necessary.
There are eight 8-32 UNC mounting holes located on the sides and back of the display.
Four holes are located at the four corners of the back and four holes are located two on
each side of the bezel. It is sufficient to mount the display by four attach points.
Mounting against the bulkhead or on a bracket:
The unit can be mounted internal,
external, or partially internal to the bulkhead. It is recommended that you leave about ¼
inch of space around the rear, top and bottom of the display for the exhaust fan to have
circulating air. When mounting from inside the bulkhead it is possible to have only the
LCD visible to the cabin. The unit will come on automatically upon power application and if
using an external video source selection box the IR is not needed. If you are using the IR to
change the video source selection then you need to have the IR LED visible to the cabin.
All manuals and user guides at all-guides.com
all-guides.com
