Service and maintenance
71
10.4.3 Corrosion protection
Assemblies and components of the vehicle are supplied from the factory with comprehensive corrosion
protection. This corrosion protection can be damaged by a wide range of external influences.
It must therefore be checked on a regular basis and restored if necessary.
Caution: risk of damage!
Road salt is highly aggressive and can damage the corrosion protection.
Therefore, observe the following during winter:
-
Clean the vehicle more frequently
-
Carefully remove any road salt residue
-
Check the corrosion protection more frequently and, if necessary,
have it restored
To avoid corrosion:
-
Check the corrosion protection more frequently when using the vehicle in winter.
-
Check the vehicle, and the compressed air and hydraulic lines in particular, for corrosion on a
regular basis.
-
Have damaged corrosion protection restored by a specialist workshop.
-
Have a specialist workshop remove any corrosion and apply corrosion protection to the affected
areas.
10.4.4 Lubrication schedule
The lubrication schedule applies to all Fliegl tandem three-way tippers.
Failure to ensure correct and sufficient lubrication carries a risk of costly repairs at a later stage.
Dispose of old oil and grease in the correct manner.
Lubricants to use:
Lubricants
Type
Quality
Oils
Hydraulic oil HLP 46
51524-2
Gear oil SAE 90 EP
API-GL 5
Greases
Lithium grease
DIN 51 502, KP 2K
Notice!
There is a risk of injury due to movable parts when lubricating.
When lubricating the towing vehicle engine, apply the parking brake and remove
the ignition key.
Lubrication schedule
Every 8 oper. hrs.
Every 50 oper. hrs.
Every 100 oper. hrs.
Every 500 oper. hrs.
- Overrun brake
mechanism
- Parking brake
- Brake linkage
- Spring bolts
- Centre bearings
- Wheel hub bearings
