Safety instructions
23
2.11.4 Technical limits
If the technical limits of the machine are not maintained, this can lead to machine damage.
This can result in accidents involving personal injury.
Compliance with the following technical limits is particularly important from a safety perspective:
Maximum permissible operating pressure of the hydraulic system
Maximum permissible axle load(s)
Maximum permissible payloads
2.12 Safety and protective devices
The following safety and protective devices are installed in the machine:
2.12.1 Emergency stop device
This device shuts down the towing vehicle (tractor) in the event of an emergency. When the drive motor
of the towing vehicle is turned off, all drives and the power supply of the trailer are switched off
immediately.
2.12.2 Description of additional safety and protective devices
The following safety devices are installed on the machine:
Service brake system
Parking brake (PB)
Stopcock for tipper hydraulics for maintenance and servicing
Bridge support for maintenance and servicing (optional)
Wheel chocks (x2)
Ladder (standard/optional)
2.12.3 In case of faulty protective devices
Defective safety equipment can lead to dangerous situations. Therefore:
-
Turn off the engine immediately
-
Protect it against being turned on again
-
If necessary, disconnect the compressed air and electrical supply
2.12.4 Inspecting safety and protective devices
All safety and protective devices must checked regularly prior to start-up. Inspection intervals according
to table:
Safety device
Inspection interval
Tightness of the hydraulic system;
functional check of the lighting
Visual inspection before each use
General condition of the vehicle
Weekly
Brake system with PB
Before (during) every start-up
Inspection and locking of the side panels
Before start-up and for any retrofit
