Fliegl Noah TTW, Operating Instructions Manual

Page: 21 / 68

TTW Noah livestock trailer Safety instructions
Fliegl Agrartechnik GmbH, 84453 Mühldorf am Inn, Germany
19 of 69
2.11 Operational safety
2.11.1 Operation without correct start-up
Without a correct start-up in accordance with these operating instructions (section 5), the operational
safety of the machine is not guaranteed. This can result in accidents involving personal injury.
2.11.2 Safeguarding perfect technical condition
Incorrect maintenance and adjustments can impair the operational safety of the machine and lead to
accidents involving personal injury.

All maintenance and adjustment work must be performed as described in the relevant sections.

Shut down and secure the machine before performing any maintenance and adjustment work.
2.11.3 Danger due to machine damage
Damage to the machine can impair its operational safety and lead to accidents involving personal injury.
The following machine components are particularly safety-relevant:

Brakes

Safety devices

Coupling mechanisms

Lighting

Hydraulics

Tyres
In the case of doubts regarding the operational safety of the machine, e.g. due to leaking fluids, visible
damage or unexpected changes in driving behaviour:

Shut down and secure the machine.

Eliminate potential causes of damage immediately, e.g remove dirt and debris or tighten loose
screws.

Establish the cause of the damage as per these operating instructions.

Repair the damage as per these operating instructions.

In the case of damage that cannot be removed independently based on these operating
instructions, have the damage repaired by a qualified workshop.
2.11.4 Technical limits
If the technical limits of the machine are not maintained, this can lead to machine damage. This can
result in accidents involving personal injury.
Compliance with the following technical limits is particularly important from a safety perspective:

Maximum permissible operating pressure of the hydraulic system

Maximum permissible axle load(s)

Maximum permissible payload