Page 19
© 2015 FlexRadio Systems, v1.0.2
Reinstalling the Long Chassis Screws
Reinstall one (1) 4-40 X ½”
Front Side Cover
TORX screw
using the long portion of the “L” TORX wrench.
Be careful
not
to cross-thread the screw and over tighten the Front Side Cover TORX screws.
The image
below shows the installation of the center TORX Side Cover screw on the right side of the FLEX-6300.
Repeat the previous procedure for reinstalling the TORX front side cover screw on the left side of the
FLEX-6300.
While pressing down on the top cover with your hand as shown below, reinstall the two (2) 4-40 X ½”
Front
Top Cover
TORX screws
using the long portion of the “L” TORX wrench.
Be careful
not
to cross-
thread the screw and over tighten the Front Top Cover TORX screws.
