S E T U P F O R M
C H A P T E R 4
Note:
The FLEX-5000 Driver will not automatically follow your audio Buffer
Size, so make sure they are both set identically (see page 27), as a
mismatch can lead to audio pops and clicks. The Driver will, however,
follow the sample rate setting in PowerSDR.
Mic Boost
Check this check box if your microphone audio is sounding too weak and you cannot increase it further
with the
Mic Gain
control on the Front Console and the
Mic Input
control on the Mixer Form
Expert
This check box will show additional controls that you should only consider using if you are an
experienced user. You should proceed with caution. Vary rarely, if ever, will you need to access these
controls.
Latency (with Expert checked)
Using the manual option, the user may add additional latency (in milliseconds) to the audio buffering
system for better audio performance. When the manual setting is off, the delay is set to 0ms. Note that
some systems will have trouble with the manual setting on and values below approx. 15ms. We
recommend using the default automatic latency setting for best results.
[The rest of this page has been left blank intentionally]
91
2003-2008 FlexRadio Systems
