Flexport FX-MH88-4K60, User Manual

Page: 38 / 46

8x8 HDMI 2.0 Matrix with Audio Matrix/ Downscaling/ AOC Supported
33
8.3.7
EDID Management
Command Function Feedback Example
EDIDMInit.
Restore the factory default EDID
data for each input.
All Input EDID Set
Default! System
Initialization......
FLEXPORT1111
FX-MH88-4K60
V1.0.0
Power ON!
Front Panel UnLock!
EDIDUpgrade[x
x].
Upgrade EDID via Serial Port
⚫
[xx]=00~08
xx=01~08 is the number of the
port(able EDID user-defined for
corresponding HDMI input), if the
xx=00, it means all ports(able
EDID user-defined for all HDMI
inputs).
Note: EDID user-defined can be
used once, if switch to another
EDID or exit, it will not be saved.
⚫
[xx]=U.
xx=U means user-defined for built-
in EDID(It can be saved in
machine for using at any time).
Note: It can user-defined only one
built-in EDID, after finishing it,
machine still use previous built-in
EDID.
When received commands,
machine will remind EDID file (.bin)
to send within 10 seconds.
Note: In order to guarantee the
data to be normal received, need
to disconnect all HDBaset before
sending the command(s)
File size: 256
Baud rate:115200bps
Quired time: About 0
second
Please wait...
Send
Completed
！
User
Define EDID Upgrade OK
By RS232 Or GUI!
EDID/[xx]/[yy].
Input ports xx use built-in EDID yy
[xx]=00~08 Input All EDID Upgrade
OK By 09 Internal EDID!