Flexitron WebdynEasy W M-Bus User Manual Download Page 23

Page: 23 / 96

[email protected] |

webdyn.com

V2.0 subject to changes | Webdyn © by Flexitron Group

New box:

• Insert the 4 screws in the 4 accessible holes on the front panel. (see illustration below).
• Tighten the 4 screws.

2.4 Interface Description

2.4.1 Product Power Supply

2.4.1.1 External Power Supply

The WebdynEasy W M-Bus hub can be powered using 12V DC with or without a battery pack connected.

Power is supplied from terminal block J8 on the left side of the battery pack.

End users must use a CE certified power supply of less than 15 watts. The distance between the

power supply and the product must not exceed 3 metres. End users must make sure their installation

meets applicable EMC standards.

Summary of Contents for WebdynEasy W M-Bus

































































































Search results

Summary of Contents for WebdynEasy W M-Bus

Reviews:

Related manuals for WebdynEasy W M-Bus

Brands by name

Popular brands

Flexitron WebdynEasy W M-Bus, User Manual

Search results

Summary of Contents for WebdynEasy W M-Bus

Reviews:

Related manuals for WebdynEasy W M-Bus

Brands by name

Popular brands