Flexit Pro7, Operating And Installation Instructions, Page: 7 / 16

7
6. Reassemble cover and motor unit
a) Reassemble the cover on the wall frame (three screws).
Be sure that the two 12V pins are in the correct position
(rating plate downwards, arrow upwards)
b) Reassemble and lock the motor unit in the wall frame by
turning it clockwise. To locate the correct position for the
bayonet mount, the multi-function selector must be in
position 12 noon.
There are also two lines on the bottom edge by the
all-pole switch which is lined up when the motor unit is
correctly mounted, see fig. 4.
6b
6a