Flexit Pro7, Operating And Installation Instructions

Page: 3 / 16

3
Thank you for choosing a quality product from Flexit!
We hope you will be fully satisfied with your new Pro7 fan for many years to come. For your safety,
every product has been individually function-tested before leaving our production facility.
Pro7 - seven fans in one
Pro7 is a multi-function fan, developed and manufactured in Sweden, for installation as a
bathroom fan (with six different ventilation options), or as an energy-saving heat transfer unit.
Its unique multi-function selector makes it easy to switch between functions. Just lift the cover.
Select a function. Ready to go!
Bathroom fan (with six optional ventilation solutions)
Pro7 has six different selectable operating functions, for performing air extraction in all homes
with natural ventilation. It has been designed and approved for installation in wet rooms (IP44)
such as WCs, bathrooms and utility rooms. For mounting on wall or in ceiling. Ducting (Ø100-
125 mm), outer louvre/grille/cowl/back draught shutter are delivered separately. See Flexit
accessories.
Heat Mover – save energy
Pro7 has an integral electronic thermostat allowing the fan to transfer surplus heat from, e.g. a
fireplace, to an adjacent room. The fan is mounted on a partition wall or between floors
(wall/floor penetrations Ø100-125 mm).
Supply air
For good home ventilation you need to ensure that:
– air can reach the wet room e.g. via a gap in the door or a throgh a ventilation valve.
– fresh air enters the home via ventilation valves in bedrooms and living rooms.