7
3
.1 Starting the machine
The central vacuum cleaner’s power cable must be
connected to a 230 volt mains socket. The appliance is
double-insulated and does not need to be earthed.
Start/stop button
All models have a start/stop button on the front to start and
stop the power unit, Fig. 7. The start/stop button can also be
used when/if you want to use a Flexit utility inlet to vacuum
direct from the machine (if you do not have a Flexit hose with
remote control) or for testing and demos.
Wireless communication LED/LCD
The machine is controlled wirelessly from the hose handle of
the vacuum cleaner. In this case you do not have to mount
a low voltage cable between the vacuum socket and the
machine.
On/off hose
Handle on hose with on/off button starting and stopping the
vacuum cleaner.
Manual hose
The vacuum cleaner starts and stops automatically when the
vacuum hose is connected to a vacuum socket. The metal
ring on the end of the hose closes the control circuit and the
vacuum cleaner starts up. When the hose is removed from
the vacuum socket, the vacuum cleaner stops.
Dustpan by the floor
Dustpan for mounting in a plinth under a cabinet will start and
stop the vacuum cleaner when opened and closed.
3.2 Servicing
If suction is poor, it indicates that the flow of air through the
machine is restricted. This may be due to the following:
• The dust bag is full and should be replaced.
• The filter is clogged and should be cleaned.
Thermal cutout
The vacuum cleaner has a thermal cut-out that trips if the
vacuum cleaner becomes overheated.
If this happens - unplug the main power cord to reset the
vacuum cleaner. Wait 5-10 minutes to allow the machine to
cool down. The vacuum cleaner should now start again. If the
cut-out trips again, you need to get a service firm to remedy
the fault.
Fig. 8
LED
LCD
Always unplug the power cord before doing
any service work!
!
See description in section 9.
Requires a low voltage cable between the
vacuum socket and the machine
Fig. 9
Filter
3 Operating instructions CVR 1000
F
Fig. 7
While you are waiting, check the hose,
dust bag and filter to be sure that nothing is
blocking the flow of air through the machine
Requires a low voltage cable between the
dustpan and the vacuum cleaner
