Flexit CS2000 V2, User Manual, Page: 9 / 48

9
2.2. Settings
2.2.1. Introduction
The first time the system is started, you need to go through
some simple steps to ensure that the system will function.
If a heating coil has been installed in the ventilation unit and
the associated settings have been made with dipswitches in
the switching space in the unit, the automatic control system
will be restarted automatically once to complete the operation.
No extra action needs to be taken. It is simply necessary to
wait until the system has restarted.
Then go through the following steps:
2.2.2.
Select language
Five languages are supported in the system:
• English
• Norwegian
• Swedish
• Danish
• Finnish
2. Getting started
2.1. HMI
A central element in the system is the HMI (control panel), where you can adjust settings and take readings. The control
panel consists of an 8-line graphic display, indicator lamps and controls for the settings. Here is a short introduction
to the control panel showing how to enter the initial settings in the system.
English is selected as the factory setting. In order to change the
language, authority level 2 at least is required (password 1000).
The menu option for making the change is:
2.2.3. Set Time/Date
To change the time and date, go to the menu option:
2.2.4. Login
In order to make changes to the system, it is normally necessary
to log in. There are four authority levels in the system, and three
of them are password protected. The level at which the user is
currently logged in is shown by the number of keys in the top
left hand corner of the display. The menus show more options
or fewer, depending on the level at which you are logged in.
Display
Shows information
Info button
Press to go to
Main index
•
Off = Stop, cool down
•
Green lamp, steady =
Normal operation
•
Flashing green =
Starting, Night
operation test, Night
cooling or Night
heating/night cooling.
•
Orange lamp, steady =
Emergency stop and
alarm with stop
•
Flashing orange = Fire
damper in motion
•
Alternating green/
orange = Manual
operation
Alarm button
•
Flashing red = alarm.
•
Red lamp, steady =
alarm acknowledged
but remaining
ESC button
•
Returns to the
previous menu page
•
Cancels current
editing
Dial
•
Turn
counterclockwise/
clockwise to go up/
down in menus or
to change values.
•
Press the button
to enter a menu
or change a value.
•
Hold the button
down to go directly
to the login menu if
the value you want
to change requires
login.
Main index > System overview > Language selection
Main index > System overview