background image

4

1. Introduction

1.1. Document 

description 

This document describes the main functions of the CS2000 automatic control and is divided into different sections for 
different parts of the system. If you only want to make basic settings to start the ventilation unit, there is a special section 
describing the startup procedure. If you require more detailed information, select the relevant section in the document.

All electrical connections must be carried out by 
qualified electricians.

!

1.2. Highlighted 

boxes

A number of different text boxes are used in the document to draw the user's attention to various things. This may be anything 
from pure information text to particularly important details to ensure that the system is not used incorrectly. Here is a brief 
description of the various boxes:

!

WARNING! 

When a text is highlighted like 

this, it means that personal injury or serious 
damage to the equipment may result if the 
instructions are not followed.

NB! 

When a text is highlighted like 

this, it means that the equipment may 
be damaged or function poorly if the 
instructions are not followed.

> EXAMPLE

Italicised text boxes show examples

A table looks like this

with various values

with various values

with various values

with various values

RESTART

Summary of Contents for CS2000 V2

















































Reviews: