manualshive.com logo in svg

Flexim FLUXUS H721, Operating Instruction

Share
Download
Flexim FLUXUS H721 Operating Instruction Download Page 171

18  Data transmission

FLUXUS H721

 18.1  Service interfaces

171

UMFLUXUS_H721V1-5EN, 2022-05-15

18

Data transmission

The data is transmit via the service interfaces or the process interface (optional) of the transmitter.

18.1

Service interfaces

By means of the program FluxDiagReader it is possible to transmit via service interfaces (USB, LAN) data to the PC.
The following tasks can be carried out:
• read and store measured values, setup settings and snaps
• graphically display measured values
• export of data in csv format
For the operation of FluxDiagReader see the help function of this program.

18.1.1

LAN interface

In order to use the LAN interface it is important to enter the network parameters.
• Select the program branch 

Special functions

.

• Press ENTER.

• Select the menu item 

Special functions\Communication\Network

.

• Press ENTER.

Manual input

• Select 

Manual

 to enter the network parameter (IP address, subnet mask and standard gateway).

Default values in the transmitter:

– IP address: 192.168.0.70
– subnet mask: 255.255.255.0
– standard gateway: 192.168.0.1

Automatic addressing with DHCP

• Select 

Automatic

 to automatically identify the network parameters (IP address, subnet mask and gateway address) via 

a DHCP server.

• Select the menu item 

Special functions\Communication\Network\Show auto config.

 to display the 

identified network parameters.

• Press ENTER.

Special functions\Communication\Network

Notice!

The entered network parameters have to accord with the network parameters of the LAN.

Notice!

The network parameters can only be automatically identified if the LAN supports DCHP.

Notice!

To transmit data from the PC to the transmitter, the program FluxDiag has to be used.

Summary of Contents for FLUXUS H721






































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands