8 Start-up
8.4 Language
FLUXUS G831ST-HT
2021-06-01, UMFLUXUS_G831ST-HTV1-0EN
72
8.4
Language
The language of the transmitter can be selected:
• Select the menu item
Language
.
• Press ENTER.
• Select the desired language from the scroll list.
• Press ENTER.
Afterwards the menu will be displayed in the selected language. The selected language remains activated when the
transmitter is switched off and on again.
The language can also be changed by entering a HotCode.
8.5
Initialization
During an initialization (INIT) of the transmitter, all settings are reset to factory default. The initialization is started with the
HotCode
909000
.
During an initialization it is tested whether the key lock is activated. If so, it has to be deactivated.
• Enter the 6-digit key lock code.
• Press ENTER.
If a measurement is running, it will be stopped.
It will be asked whether the initial settings are to be carried out.
If
Yes
is selected, the following setting dialogs will be displayed:
•Language
•Date/time
•Units of measurement
•Delete meas. values
•Delete snaps
•
Delete user subst.
(all customized materials and fluids which were stored after delivery will be deleted)
•Reset totalizers
8.6
Date and time
The transmitter has a battery-powered clock. Measured values are automatically stored with date and time.
• Select the menu item
Date/time
.
The adjusted time is displayed.
• Enter the current time via the numeric field.
• Press ENTER.
The adjusted date is displayed.
• Enter the current date via the numeric field.
• Press ENTER.
Special functions\System settings\Language
Initial settings
Special functions\System settings\Date/time