8 Start-up
FLUXUS G722ST-HT
8.4 Program branches
79
UMFLUXUS_G722ST-HTV1-2EN, 2021-09-01
8.4
Program branches
The following schema shows the program branches. For a detailed overview of the menu structure see annex A.
8.5
Language
The language of the transmitter can be selected:
• Select the menu item
Language
.
• Press ENTER.
• Select the desired language from the scroll list.
• Press ENTER.
Afterwards the menu will be displayed in the selected language. The selected language remains activated when the
transmitter is switched off and on again.
The language can also be changed by entering a HotCode.
8.6
Initialization
During an initialization (INIT) of the transmitter, all settings are reset to the factory settings.
Proceed as follows to execute an initialization:
• When switching on a transmitter: keep
and C pressed.
• During the operation of the transmitter: press
, C and ENTER simultaneously. Release only ENTER. Keep
and C pressed.
During an initialization it is tested whether the key lock is activated. If so, it has to be deactivated.
• Enter a 6-digit key lock code.
• Press ENTER.
If a measurement is currently running, it will be stopped.
Parameters
Measurement
Options
Special functions
Transducer parameters
Measuring point number
Physical quantity
System settings
Pipe parameters
Transducer distance
Units of measurement
Inputs
Fluid parameters
Transducer positioning
Outputs
Current output
Length of extension cable
Transducer pair distance
Input assignment
Measurement
Measurement
Remote functions
Data logger
Event triggers
Snaps
Special settings
Communication
Units of measurement
Totalizers
Dialogs/Menus
Parameter record
Libraries
Minimum pipe diameter
Special functions\System settings\Language
