Flexim FLUXUS F401, Operating Instruction

Page: 88 / 160

14 Data logger
14.3 Configuration of the data logger
FLUXUS F401
2020-06-12, UMFLUXUS_F401V2-1EN
88
• Enter the storage rate if EXTRA was selected.
• Press ENTER.
14.3 Configuration of the data logger
• Select Special Funct.\SYSTEM settings\Storing .
• Press ENTER.
Starting time
In order to start the storing of measured values with several measuring instruments at the
same time, it is possible to set a starting time.
• Select the moment at which the storing has to start.
Output Options\...\Storage Rate\EXTRA
Special Funct.\SYSTEM settings\Storing
Special Funct.\SYSTEM settings\Storing\Start logger
display description
Promptly
The storing starts immediately.
On full 5 min.
The storing starts in the next full 5 minutes.
On full 10 min.
The storing starts in the next full 10 minutes.
On quarter hour
The storing starts in the next full 15 minutes.
On half hour
The storing starts in the next full 30 minutes.
On full hour
The storing starts in the next full 60 minutes.
Example
actual time: 09:06 am
setting: On full 10 min.
The storing starts at 09:10 am.