Flexim 990735-1, User Manual

Page: 109 / 160

15 Libraries FLUXUS ADM 8027, F801, ADM 8127B
UMFLUXUS_F8V4-6-1EN, 2018-10-10 109
Fluid Parameter
Enter the fluid's:
• longitudinal sound speed
• kinematic viscosity
• density
Depending on the selected function, 1...5 values have to be entered. Press ENTER after each input.
If an already defined fluid is edited, for each parameter of some of the functions there will be a request whether it is to be
edited. Select
yes
or
no
. Press ENTER. Change the values, if necessary.
15.4 Deleting a User Defined Material/Fluids
To delete a user defined material/fluid, proceed as follows:
Select
Special Funct.
\
Install Material
or
Install Medium
. Press ENTER.
If the extended library is activated, press ENTER until the request for deleting is displayed.
15.5 Arrangement of the Material/Fluid Scroll List
The materials and fluids to be displayed in the program branch
Parameter
are arranged in the material scroll list or in the
fluid scroll list.
Select
yes
to store the entered parameters or no to quit the menu item without storing.
Press ENTER.
Select
yes
to store the entered properties,
no
to quit the menu item without storing. Press
ENTER.
Select
delete
. Press ENTER.
Select the material/fluid to be deleted. Press ENTER.
Select
yes
or
no
. Press ENTER.
Note! User defined materials/fluids will always be displayed in the scroll lists of the program branch
Pa-
rameter
.
Select
Special Funct.
\
SYSTEM settings
\
Libraries
.
Press ENTER.
Select
Material list
to edit the material scroll list or
Media list
to edit the fluid
scroll list.
Select
back
to return to
SYSTEM setting
. Press ENTER.
Select
factory
if all materials/fluids of the internal database are to be displayed in the
scroll list. An already existing scroll list will not be deleted but only deactivated.
Select
user
to activate the user defined scroll list.
Press ENTER.
If
user
is selected, the material or fluid scroll list can be edited (see section
15.5.1...15.5.3).
Save changes
no
>YES<
Save changes
no
>YES<
Install Material
edit >DELETE<
USER Material
#01: Polystyrene
Really Delete?
no
>YES<
SYSTEM settings ↕
Libraries
Libraries ↕
Material list
Material list
factory
>user<
Material list ↕
>Show list